Made in India

These bone shapes are ideal for use in making scrimshaw projects with your own designs. They can be carved or painted. The bone slab is approximately 3 1/8" long, 1 1/8" wide, 1/8" thick in the middle, and 1/4" thick along the sides. In metric, this is approximately 7.94 cm long by 2.86 cm wide by 0.32 cm thick in the middle and 0.64 cm thick on the edges. Each slab weighs approximately 0.78 ounces or 22 grams. Domesticated water buffalo are not endangered. ...

These bone shapes are ideal for use in making necklaces with your own designs. They can be carved or painted. The bone disc is 1" in diameter and approximately 1/4" thick. Domesticated water buffalo are not endangered.

These bone shapes are ideal for use in making necklaces with your own designs. They can be carved or painted.The rounded bone slab with hole is 3" long, 1" wide, and approximately 0.25" thick. Domesticated water buffalo are not endangered.

These bone shapes are ideal for use in making scrimshaw projects with your own designs. They can be carved or painted. These bone slabs are thinner than our regular bone slabs.  They are approximately 3" long, 1 1/8" wide, and 0.02" to 0.12" in the middle, and 1/8" thick along the sides. In metric, this is approximately 7.62 cm long by 2.86 cm wide by 0.5 mm to 3 mm thick in the middle and 0.32 cm thick on the edges. Each slab weighs approximately 0.78 ounces...

These bone discs are ideal for use in making necklaces with your own designs. They can be carved or painted. You will not receive the exact pieces shown in the photos but ones similar. There is some variation from piece to piece as these are all hand carved. The bone discs are approximately 1" in diameter and 1/8" thick. Domesticated water buffalo are not endangered.

These bone slabs can be used for scrimshaw or inlay. These bone shapes are ideal for use in making scrimshaw projects with your own designs. They can be carved or painted. You will not receive the exact pieces shown in the photos but ones similar. There is some variation from piece to piece as these are all hand carved. The bone slabs are approximately 3" long, 1" wide, 1/8" thick in the middle, and 3/8" thick along the sides. In metric, this is approximately 7.62 cm long by 2.54 cm wide by...

These flat bone slabs can be used for scrimshaw or inlay. These bone shapes are ideal for use in making scrimshaw projects with your own designs. They can be carved or painted. The bone slabs can also be used for knife handle scales. You will not receive the exact pieces shown in the photos but ones similar. There is some minor variation from piece to piece as these are all hand carved. The flat bone slabs are approximately 3" long, 1" wide, and 1/8" thick. In metric, this is approximately...

These high quality bone pendants are made from domesticated water buffalo bone. You will not receive the exact pieces shown in the photos but ones similar. There is some variation from piece to piece as these are all hand carved. The eagle bone pendants are approximately 1" long and 2" wide. In metric, this is approximately 2.5 cm long by 5 cm wide. A box of 100 pieces weighs about 1 lbs. Domesticated water buffalo are not endangered.

These high quality bone pendants are made from domesticated water buffalo bone. You will not receive the exact pieces shown in the photos but ones similar. There is some variation from piece to piece as these are all hand carved. The wolf bone pendants are approximately 2" long and 0.75" wide. In metric, this is approximately 5.08 cm long by 1.9 cm wide. Domesticated water buffalo are not endangered.

These high quality bone pendants are made from domesticated water buffalo bone. You will not receive the exact pieces shown in the photos but ones similar. There is some variation from piece to piece as these are all hand carved. The turtle bone pendants are approximately 2" long and 1" wide. In metric, this is approximately 5 cm long by 2.5 cm wide. Domesticated water buffalo are not endangered.

These high quality bone pendants are made from domesticated water buffalo bone. You will not receive the exact pieces shown in the photos but ones similar. There is some variation from piece to piece as these are all hand carved. The walking bear bone pendants are approximately 1.75" long and 0.75" wide. In metric, this is approximately 4.5 cm long by 2 cm wide. Domesticated water buffalo are not endangered.

These high quality bone pendants are made from domesticated water buffalo bone. You will not receive the exact pieces shown in the photos but ones similar. There is some variation from piece to piece as these are all hand carved. The eagle bone pendants are approximately 1.5" long and 0.5" wide. In metric, this is approximately 3.8 cm long by 1.25 cm wide. Domesticated water buffalo are not endangered.

These high quality bone pendants are made from domesticated water buffalo bone. You will not receive the exact pieces shown in the photos but ones similar. There is some variation from piece to piece as these are all hand carved. The eagle bone pendants are approximately 1.5" long and 1.5" wide. In metric, this is approximately 3.8 cm long by 3.8 cm wide. Domesticated water buffalo are not endangered.

These high quality bone pendants are made from domesticated water buffalo bone. You will not receive the exact pieces shown in the photos but ones similar. There is some variation from piece to piece as these are all hand carved.The replica elk tooth bone pendants are approximately 1.25" long by 0.5" wide. Domesticated water buffalo are not endangered.

The thickness of the slim hairpipe falls somewhere in between the regular and ultra thin hairpipe. It is ideal for use in making bracelets and chokers with a more delicate look. The following measurements are approximate. The hairpipe is handmade so there will be some variation within each size. Length (inches) Middle Width (mm) End Width (mm) Weight of box of 100 0.5"5.8 5.8 1.8 oz. 1.0" 4.8 4.6 - 5.2 2.7 oz. 1.5" 5.7 5.0 - 5.1 4.8 oz. To make antiqued bone hairpipe, just put the hairpipe in...

The thickness of the slim hairpipe falls somewhere in between the regular and ultra thin hairpipe. It is ideal for use in making bracelets and chokers with a more delicate look. The following measurements are approximate. The hairpipe is handmade so there will be some variation within each size. Length (inches) Middle Width (mm) End Width (mm) Weight of box of 100 0.5"5.8 5.8 1.8 oz. 1.0" 4.8 4.6 - 5.2 2.7 oz. 1.5" 5.7 5.0 - 5.1 4.8 oz. To make antiqued bone hairpipe, just put the hairpipe in...

The thickness of the slim hairpipe falls somewhere in between the regular and ultra thin hairpipe. It is ideal for use in making bracelets and chokers with a more delicate look. The following measurements are approximate. The hairpipe is handmade so there will be some variation within each size. Length (inches) Middle Width (mm) End Width (mm) Weight of box of 100 0.5"5.8 5.8 1.8 oz. 1.0" 4.8 4.6 - 5.2 2.7 oz. 1.5" 5.7 5.0 - 5.1 4.8 oz. To make antiqued bone hairpipe, just put the hairpipe in...

Ultra thin hairpipe is around 60% to 70% of the thickness of the regular hairpipe. It is ideal for use in making bracelets and chokers with a more delicate look. The following measurements are approximate. The hairpipe is handmade so there will be some variation within each size. Length (inches) Middle Width (mm) End Width (mm) Weight of box of 100 0.5" 4.1 4.1 0.7 oz. 1.0" 4.2 3.9 - 4.0 1.8 oz. 1.5" 4.8 4.0 - 4.2 2.8 oz. To make antiqued bone hairpipe, just put the hairpipe in a bowl, boil up...

Ultra thin hairpipe is around 60% to 70% of the thickness of the regular hairpipe. It is ideal for use in making bracelets and chokers with a more delicate look. The following measurements are approximate. The hairpipe is handmade so there will be some variation within each size. Length (inches) Middle Width (mm) End Width (mm) Weight of box of 100 0.5" 4.1 4.1 0.7 oz. 1.0" 4.2 3.9 - 4.0 1.8 oz. 1.5" 4.8 4.0 - 4.2 2.8 oz. To make antiqued bone hairpipe, just put the hairpipe in a bowl, boil up...

Ultra thin hairpipe is around 60% to 70% of the thickness of the regular hairpipe. It is ideal for use in making bracelets and chokers with a more delicate look. The following measurements are approximate. The hairpipe is handmade so there will be some variation within each size. Length (inches) Middle Width (mm) End Width (mm) Weight of box of 100 0.5" 4.1 4.1 0.7 oz. 1.0" 4.2 3.9 - 4.0 1.8 oz. 1.5" 4.8 4.0 - 4.2 2.8 oz. To make antiqued bone hairpipe, just put the hairpipe in a bowl, boil up...

These are 1.5" long etched black bone hairpipes. The hole size is about 2 to 3 mm. They are sold in bags of 100 beads. You will get hairpipes similar to the ones shown in the photos, but not the exact ones. There will be slight variation from bead to bead.

These are 1" long etched black bone hairpipes. The hole size is about 2 to 3 mm. They are sold in bags of 100 beads. You will get hairpipes similar to the ones shown in the photos, but not the exact ones. There will be slight variation from bead to bead.

These are 1" long etched black bone hairpipes. The hole size is about 2 to 3 mm. They are sold in bags of 100 beads. You will get hairpipes similar to the ones shown in the photos, but not the exact ones. There will be slight variation from bead to bead.

These are 1" long etched black bone hairpipes. The hole size is about 2 to 3 mm. They are sold in bags of 100 beads. You will get hairpipes similar to the ones shown in the photos, but not the exact ones. There will be slight variation from bead to bead.