All Products

Ultra thin hairpipe is around 60% to 70% of the thickness of the regular hairpipe. It is ideal for use in making bracelets and chokers with a more delicate look. The following measurements are approximate. The hairpipe is handmade so there will be some variation within each size. Length (inches) Middle Width (mm) End Width (mm) Weight of box of 100 0.5" 4.1 4.1 0.7 oz. 1.0" 4.2 3.9 - 4.0 1.8 oz. 1.5" 4.8 4.0 - 4.2 2.8 oz. To make antiqued bone hairpipe, just put the hairpipe in a bowl, boil up...

Ultra thin hairpipe is around 60% to 70% of the thickness of the regular hairpipe. It is ideal for use in making bracelets and chokers with a more delicate look. The following measurements are approximate. The hairpipe is handmade so there will be some variation within each size. Length (inches) Middle Width (mm) End Width (mm) Weight of box of 100 0.5" 4.1 4.1 0.7 oz. 1.0" 4.2 3.9 - 4.0 1.8 oz. 1.5" 4.8 4.0 - 4.2 2.8 oz. To make antiqued bone hairpipe, just put the hairpipe in a bowl, boil up...

These bone shapes are ideal for use in making necklaces with your own designs. They can be carved or painted.The bone rectangle is 1 5/8" long, 1" wide, and approximately 1/4" thick.domesticated water buffalo are not endangered.

These bone shapes are ideal for use in making scrimshaw projects with your own designs. They can be carved or painted. The bone slab is approximately 3 1/8" long, 1 1/8" wide, 1/8" thick in the middle, and 1/4" thick along the sides. In metric, this is approximately 7.94 cm long by 2.86 cm wide by 0.32 cm thick in the middle and 0.64 cm thick on the edges. Each slab weighs approximately 0.78 ounces or 22 grams. Domesticated water buffalo are not endangered. ...

These bone slabs can be used for scrimshaw or inlay. These bone shapes are ideal for use in making scrimshaw projects with your own designs. They can be carved or painted. You will not receive the exact pieces shown in the photos but ones similar. There is some variation from piece to piece as these are all hand carved. The bone slabs are approximately 3" long, 1" wide, 1/8" thick in the middle, and 3/8" thick along the sides. In metric, this is approximately 7.62 cm long by 2.54 cm wide by...

These bone shapes are ideal for use in making necklaces with your own designs. They can be carved or painted.The rounded bone slab with hole is 3" long, 1" wide, and approximately 0.25" thick. Domesticated water buffalo are not endangered.

These flat bone slabs can be used for scrimshaw or inlay. These bone shapes are ideal for use in making scrimshaw projects with your own designs. They can be carved or painted. The bone slabs can also be used for knife handle scales. You will not receive the exact pieces shown in the photos but ones similar. There is some minor variation from piece to piece as these are all hand carved. The flat bone slabs are approximately 3" long, 1" wide, and 1/8" thick. In metric, this is approximately...

These bone shapes are ideal for use in making scrimshaw projects with your own designs. They can be carved or painted. These bone slabs are thinner than our regular bone slabs.  They are approximately 3" long, 1 1/8" wide, and 0.02" to 0.12" in the middle, and 1/8" thick along the sides. In metric, this is approximately 7.62 cm long by 2.86 cm wide by 0.5 mm to 3 mm thick in the middle and 0.32 cm thick on the edges. Each slab weighs approximately 0.78 ounces...