Made in India

These powder horns are made from water buffalo horn and are very nice quality compared to some we have seen in the past. They are hollow inside. The plugs are made from wood. The horns with brass tips measure 12-13.5" from plug to plug. They are approximately 6-7" in circumference around the thickest part. Domesticated water buffalo are not endangered.

These powder horns are made from water buffalo horn and are very nice quality compared to some we have seen in the past. They are hollow inside. The plugs are made from wood. The large horns measure 10-13" from plug to plug. They are approximately 7-9" in circumference around the thickest part. Weight: 4 oz. per horn, or 1 lb. for four. Domesticated water buffalo are not endangered.

These powder horns are made from water buffalo horn and are very nice quality compared to some we have seen in the past. They are hollow inside. The plugs are made from wood. The small horns measure 8-10" from plug to plug. They are approximately 6-7" in circumference around the thickest part. Weight: 4 oz. per horn, or 1 lb. for four. Domesticated water buffalo are not endangered.

These bone shapes are ideal for use in making scrimshaw projects with your own designs. They can be carved or painted. The bone slab is approximately 3 1/8" long, 1 1/8" wide, 1/8" thick in the middle, and 1/4" thick along the sides. In metric, this is approximately 7.94 cm long by 2.86 cm wide by 0.32 cm thick in the middle and 0.64 cm thick on the edges. Each slab weighs approximately 0.78 ounces or 22 grams. Domesticated water buffalo are not endangered. ...

These bone shapes are ideal for use in making necklaces with your own designs. They can be carved or painted. The bone disc is 1" in diameter and approximately 1/4" thick. Domesticated water buffalo are not endangered.

These bone shapes are ideal for use in making necklaces with your own designs. They can be carved or painted.The rounded bone slab with hole is 3" long, 1" wide, and approximately 0.25" thick. Domesticated water buffalo are not endangered.

These bone shapes are ideal for use in making scrimshaw projects with your own designs. They can be carved or painted. These bone slabs are thinner than our regular bone slabs.  They are approximately 3" long, 1 1/8" wide, and 0.02" to 0.12" in the middle, and 1/8" thick along the sides. In metric, this is approximately 7.62 cm long by 2.86 cm wide by 0.5 mm to 3 mm thick in the middle and 0.32 cm thick on the edges. Each slab weighs approximately 0.78 ounces...

These bone discs are ideal for use in making necklaces with your own designs. They can be carved or painted. You will not receive the exact pieces shown in the photos but ones similar. There is some variation from piece to piece as these are all hand carved. The bone discs are approximately 1" in diameter and 1/8" thick. Domesticated water buffalo are not endangered.

These bone slabs can be used for scrimshaw or inlay. These bone shapes are ideal for use in making scrimshaw projects with your own designs. They can be carved or painted. You will not receive the exact pieces shown in the photos but ones similar. There is some variation from piece to piece as these are all hand carved. The bone slabs are approximately 3" long, 1" wide, 1/8" thick in the middle, and 3/8" thick along the sides. In metric, this is approximately 7.62 cm long by 2.54 cm wide by...

These flat bone slabs can be used for scrimshaw or inlay. These bone shapes are ideal for use in making scrimshaw projects with your own designs. They can be carved or painted. The bone slabs can also be used for knife handle scales. You will not receive the exact pieces shown in the photos but ones similar. There is some minor variation from piece to piece as these are all hand carved. The flat bone slabs are approximately 3" long, 1" wide, and 1/8" thick. In metric, this is approximately...

These high quality bone pendants are made from domesticated water buffalo bone. You will not receive the exact pieces shown in the photos but ones similar. There is some variation from piece to piece as these are all hand carved. The eagle bone pendants are approximately 1" long and 2" wide. In metric, this is approximately 2.5 cm long by 5 cm wide. A box of 100 pieces weighs about 1 lbs. Domesticated water buffalo are not endangered.

These high quality bone pendants are made from domesticated water buffalo bone. You will not receive the exact pieces shown in the photos but ones similar. There is some variation from piece to piece as these are all hand carved. The wolf bone pendants are approximately 2" long and 0.75" wide. In metric, this is approximately 5.08 cm long by 1.9 cm wide. Domesticated water buffalo are not endangered.

These high quality bone pendants are made from domesticated water buffalo bone. You will not receive the exact pieces shown in the photos but ones similar. There is some variation from piece to piece as these are all hand carved. The turtle bone pendants are approximately 2" long and 1" wide. In metric, this is approximately 5 cm long by 2.5 cm wide. Domesticated water buffalo are not endangered.

These high quality bone pendants are made from domesticated water buffalo bone. You will not receive the exact pieces shown in the photos but ones similar. There is some variation from piece to piece as these are all hand carved. The walking bear bone pendants are approximately 1.75" long and 0.75" wide. In metric, this is approximately 4.5 cm long by 2 cm wide. Domesticated water buffalo are not endangered.

These high quality bone pendants are made from domesticated water buffalo bone. You will not receive the exact pieces shown in the photos but ones similar. There is some variation from piece to piece as these are all hand carved. The eagle bone pendants are approximately 1.5" long and 0.5" wide. In metric, this is approximately 3.8 cm long by 1.25 cm wide. Domesticated water buffalo are not endangered.

These high quality bone pendants are made from domesticated water buffalo bone. You will not receive the exact pieces shown in the photos but ones similar. There is some variation from piece to piece as these are all hand carved. The eagle bone pendants are approximately 1.5" long and 1.5" wide. In metric, this is approximately 3.8 cm long by 3.8 cm wide. Domesticated water buffalo are not endangered.

These high quality bone pendants are made from domesticated water buffalo bone. You will not receive the exact pieces shown in the photos but ones similar. There is some variation from piece to piece as these are all hand carved.The replica elk tooth bone pendants are approximately 1.25" long by 0.5" wide. Domesticated water buffalo are not endangered.

The bone spacers are used for making Native American bracelets and chokers with multiple rows. The spacers are sold in boxes of 100.Domesticated water buffalo are not endangered.

The bone spacers are used for making Native American bracelets and chokers with multiple rows. The spacers are sold in boxes of 100. Domesticated water buffalo are not endangered.

This is round bolo lacing made from cotton cord that has been dyed and waxed.There are no export controls for this item.

This 4 strand round braid, sometimes referred to as bolo cord, is used for trim and many types of jewelry. It is made from dyed and waxed cotton cord. It is hand braided around a cord to prevent stretch. It comes in two widths and is put up on 25-yard (75 foot) spools. The 3 mm spools weigh ~4-5.5 oz. The 5mm spools weigh ~1-1.2 lbs.There are no export controls for this item.

This 4 strand round braid, sometimes referred to as bolo cord, is used for trim and many types of jewelry. It is made from dyed and waxed cotton cord. It is hand braided around a cord to prevent stretch. It comes in two widths and is put up on 25-yard (75 foot) spools. The 3 mm spools weigh ~4-5.5 oz. The 5mm spools weigh ~1-1.2 lbs.There are no export controls for this item.

This 4 strand round braid, sometimes referred to as bolo cord, is used for trim and many types of jewelry. It is made from dyed and waxed cotton cord. It is hand braided around a cord to prevent stretch. It comes in two widths and is put up on 25-yard (75 foot) spools. The 3 mm spools weigh ~4-5.5 oz. The 5mm spools weigh ~1-1.2 lbs.There are no export controls for this item.

This 4 strand round braid, sometimes referred to as bolo cord, is used for trim and many types of jewelry. It is made from dyed and waxed cotton cord. It is hand braided around a cord to prevent stretch. It comes in two widths and is put up on 25-yard (75 foot) spools. The 3 mm spools weigh ~4-5.5 oz. The 5mm spools weigh ~1-1.2 lbs. There are no export controls for this item.