Products 1-16 of 69
Show
Code: 15-205-A (Y1L)
Out of Stock
Availability: Out of Stock
Product of USA
Item #: 15-205-A (Y1L) -
These skulls have been professionally cleaned and prepared. They come with the teeth and lower jaw. The upper and lower jaws may be separate or glued together. They average around 5" (12.5 cm) long, 2.5 - 3" (6.5 - 7.5 cm) tall, and 3" (7.5 cm) wide. They weigh about 2 oz. (58 grams). A USFWS export permit is required for all shipments outside of the U.S.
Code: 15-202 (Y2J)
In Stock
Availability: In Stock
Product of USA
Item #: 15-202 (Y2J) -
These skulls have been professionally cleaned and prepared. They include the teeth and the lower jaw. The upper and lower jaws may be separate or glued together. Length: 5" (12.5 cm) Highest point: 4.75" (12 cm) Widest point: 4" (10 cm) A USFWS export permit is required for all shipments outside of the U.S.
Code: 15-222-G6324 (Y2P)
In Stock
Availability: In Stock
Product of Canada
Item #: 15-222-G6324 (Y2P) -
This is a cleaned and bleached Belgium draft horse skull from a family-run farm in Quebec, Canada that was prepared by a professional taxidermist. The skull is in very good condition. Horses are not an endangered species and are not subject to U.S. Fish and Wildlife controls or CITES.
Code: 15-219
Out of Stock
Availability: Out of Stock
Product of USA
Item #: 15-219 -
We usually have a limited number of professionally cleaned bobcat skulls for sale at any time. The upper and lower jaws may be separate or glued together. The size averages 6" (15 cm) long, 4" (10 cm) wide, and 3.5" (9 cm) tall. Bobcat are subject to CITES and are not for export without a CITES permit. Not for sale in California and New Jersey.
Code: 15-225-AS
Out of Stock
Availability: Out of Stock
Product of USA
Item #: 15-225-AS -
These are professionally cleaned buffalo skulls with horn caps. The horn caps are removable.The skulls are a by-product of buffalo that were ranch raised for meat. The animals were not killed just for their skulls.A USFWS export permit is required for all shipments outside the USA.
Code: 15-235-AS
Out of Stock
Availability: Out of Stock
Product of China
Item #: 15-235-AS -
We have a selection of domesticated house cat skulls. The upper and lower jaws may be separate or glued together. One skull measured randomly was 4" long, 3" wide, and 2" high. The cats were not killed just for their skulls. Felis catus are not subject to CITES or USFWS controls.
Code: 15-253-13 (Y2J)
In Stock
Availability: In Stock
Product of Indonesia
Item #: 15-253-13 (Y2J) -
These are cleaned bat skulls. The cave nectar bat is also known as the dawn bat, common dawn bat, common nectar bat, and lesser dawn bat. The upper and lower jaws may be separate or glued together. Length: 1.50" Width: 0.75" Weight: 0.03 oz (1.25 gram) These bats are not endangered and are not subject to CITES controls. For sale in the USA only. Not for export.
Code: 15-204-1 (Y2J)
In Stock
Availability: In Stock
Product of USA
Item #: 15-204-1 (Y2J) -
These coyote skulls have been professionally cleaned and prepared. They come with the teeth and lower jaw. The upper and lower jaws may be separate or glued together. They are sorted into #1 skulls, which have no breaks or holes, and #2 skulls, which have broken pieces and may have holes. We measured a skull to be 8" (20.5 cm) long, and 4.5" (11.5 cm) wide. The highest point of the skulls range between 3.5 - 4" (9 - 10 cm).
Code: 15-204-2 (Y2J)
In Stock
Availability: In Stock
Product of USA
Item #: 15-204-2 (Y2J) -
These coyote skulls have been professionally cleaned and prepared. They come with the teeth and lower jaw. The upper and lower jaws may be separate or glued together. They are sorted into #1 skulls, which have no breaks or holes, and #2 skulls, which have broken pieces and may have holes. We measured a skull to be 8" (20.5 cm) long, and 4.5" (11.5 cm) wide. The highest point of the skulls range between 3.5 - 4" (9 - 10 cm).
Code: 15-244-N-AS
Out of Stock
Availability: Out of Stock
Product of USA
Item #: 15-244-N-AS -
These are white tail deer skulls with no antlers. They have been cleaned. The lower jaw is not glued to the skull. White tail deer are not an endangered species and are not subject to CITES controls. A USFWS export permit is required for all shipments outside the USA. Not for sale in most southeastern states due to state regulations. It was confirmed by USFWS on October 15, 2015 that it is okay to sell white tail deer antler to California because the species is not native to that state. ...
Code: 15-253-12 (Y2J)
In Stock
Availability: In Stock
Product of Indonesia
Item #: 15-253-12 (Y2J) -
These are cleaned bat skulls. The diadem leaf-nosed bat is also known as the diadem roundleaf bat. The upper and lower jaws may be separate or glued together. Length: 1.25" Width: 0.5" Weight: 0.03 oz (1 gram) These bats are not endangered and are not subject to CITES controls. For sale in the USA only. Not for export.
Code: 15-235-G6353 (Y2K)
In Stock
Availability: In Stock
Product of China
Item #: 15-235-G6353 (Y2K) -
This is a real domesticated house cat skull that has been professionally cleaned. The cats were not killed just for their skulls. Not subject to CITES or USFWS controls.
Code: 15-235-G6354 (Y2K)
In Stock
Availability: In Stock
Product of China
Item #: 15-235-G6354 (Y2K) -
This is a real domesticated house cat skull that has been professionally cleaned. The cats were not killed just for their skulls. Not subject to CITES or USFWS controls.
Code: 15-235-G6355 (Y2K)
In Stock
Availability: In Stock
Product of China
Item #: 15-235-G6355 (Y2K) -
This is a real domesticated house cat skull that has been professionally cleaned. The cats were not killed just for their skulls. Not subject to CITES or USFWS controls.
Code: 15-235-G6356 (Y2K)
In Stock
Availability: In Stock
Product of China
Item #: 15-235-G6356 (Y2K) -
This is a real domesticated house cat skull that has been professionally cleaned. The cats were not killed just for their skulls. Not subject to CITES or USFWS controls.
Code: 15-229 (Y1J)
In Stock
Availability: In Stock
Product of USA
Item #: 15-229 (Y1J) -
We usually have a limited number of professionally cleaned ermine skulls for sale at any time. The upper and lower jaws may be separate or glued together. An average skull we had in stock was 1.75" long, 0.75" wide, and 0.5" high. A USFWS export permit is required for all shipments outside of the U.S.