Product of USA

These are real longnose gar skulls.  They are also known as needlenose gar. They have been cleaned and include the lower jaw. The upper and lower jaws may be separate or glued together. These skulls are approximately 9.5" to 12.25" long by 1.5" to 2.5" wide by 1" to 2" tall.  The skulls weigh about 1.8 to 3 ounces. Longnose gar are not endangered or subject to CITES. A USFWS export permit is required for all shipments outside the USA. ...

These are white tail deer skulls with no antlers. They have been cleaned. The lower jaw is not glued to the skull. White tail deer are not an endangered species and are not subject to CITES controls. A USFWS export permit is required for all shipments outside the USA. Not for sale in most southeastern states due to state regulations. It was confirmed by USFWS on October 15, 2015 that it is okay to sell white tail deer antler to California because the species is not native to that state. ...

These are real longnose gar skulls.  They are also known as needlenose gar. They have been cleaned and include the lower jaw. The upper and lower jaws may be separate or glued together. Longnose gar are not endangered or subject to CITES. A USFWS export permit is required for all shipments outside the USA.

These are from real buffalo, not from water buffalo. They come from a ranch in the U.S. and have been cooked and cleaned. The horns are all from cows (i.e., female buffalo) and measure 8" to 12" long on the outside curve. The horns are hollow on the inside. Only the very extreme tip is solid. These horns are from ranch raised bison that have been killed for the meat.The #3 Grade have imperfections such as broken tips, holes, etc. Many of our customers use buffalo horns as dog chews. We have...

These are half coyote jaw bones or mandibles.  They are a mix of right and left jaw bones.  They are clean and measure 5" to 6" long and about 1" wide. They weigh 25 to 35 grams each. A U.S. Fish & Wildlife export permit is required for all shipments outside of the U.S. Coyotes are not an endangered species.

This is an assortment of antler scrap pieces from white tail and mule deers. They come in varying sizes and are ideal for craft projects. All shipments outside of the U.S. require U.S. Fish and Wildlife export clearance.Not for sale in most southeastern states due to state regulations.It was confirmed by USFWS on October 15, 2015 that it is okay to sell white tail deer antler to California because the species is not native to that state.

These are moose antler scraps sold by the pound. When you order this item, you will get an assortment of sizes, colors and shapes. Ideal for crafts.Moose are not an endangered species.A USFWS export permit is required for all shipments outside the USA.

This is an assortment of tumbled antler scrap pieces from white tail and mule deers. They come in varying sizes and shapes, and are ideal for craft projects. All shipments outside of the U.S. require U.S. Fish and Wildlife export clearance. Not for sale in most southeastern states due to state regulations. It was confirmed by USFWS on October 15, 2015 that it is okay to sell white tail deer antler to California because the species is not native to that state. ...

This is an assortment of polished antler scrap pieces from white tail and mule deers. They come in varying sizes and are ideal for craft projects. All shipments outside of the U.S. require U.S. Fish and Wildlife export clearance. Not for sale in most southeastern states due to state regulations. It was confirmed by USFWS on October 15, 2015 that it is okay to sell white tail deer antler to California because the species is not native to that state. ...

The commercial brain-tanned elk leather pieces are available in different sizes. The project pieces come from quality elk leather hides that are tanned using a method that emulates the traditional brain-tanning process. These commercial brain-tanned hides have a smoky smell and are supple. Elk are not an endangered species, and are not killed just for their skins. A U.S. Fish & Wildlife export permit is required for all shipments outside of the United States. ...

These craft American Gray fox skins are of nice quality, with flawed faces, good bodies and no feet. They come cased (i.e., like a sausage and not split at the belly). We measured one sample fox skin to be 28" from the tip of the nose to the base of the tail, 6" wide across the middle, with a tail 14" long.American gray fox are not an endangered species and are not subject to CITES controls.A USFWS export permit is required for all shipments outside the USA. ...

These are scrap leather from elk leather hides tanned using a method that emulates the traditional brain-tanning process. They come in different sizes and shapes. These commercial brain-tanned hides have a smoky smell and are supple. Elk are not an endangered species, and are not killed just for their skins. A U.S. Fish & Wildlife export permit is required for all shipments outside of the United States.

This is TOPGRAIN deerskin leather--often called Buckskin as well. It has a smooth side (skin side) and a rough side (suede side). We sell deerskin leather by the full hide. The White Tail Deer hides vary in size from about 8 square feet to 13 square feet. Each hide is marked with its size. We can usually select either small, medium, or large hides according to your wishes. We will not, however, cut hides to measure or select just the best hides. No returns on cut hide.

This is TOPGRAIN deerskin leather--often called Buckskin as well. It has a smooth side (skin side) and a rough side (suede side). We sell deerskin leather by the full hide. The White Tail Deer hides vary in size from about 8 square feet to 13 square feet. Each hide is marked with its size. We can usually select either small, medium, or large hides according to your wishes. We will not, however, cut hides to measure or select just the best hides. No returns on cut hide.

This is TOPGRAIN deerskin leather--often called Buckskin as well. It has a smooth side (skin side) and a rough side (suede side). We sell deerskin leather by the full hide. The White Tail Deer hides vary in size from about 8 square feet to 13 square feet. Each hide is marked with its size. We can usually select either small, medium, or large hides according to your wishes. We will not, however, cut hides to measure or select just the best hides. No returns on cut hide.

This is topgrain #1/#2 grade deerskin leather. These are whole hides with some holes, blemishes, and scratches on the leather. Most of these imperfections are near the side of the skin. They come in different sizes and shapes. Each piece is different.Deer are not endangered.A USFWS export permit is required for all shipments outside the U.S.

This is topgrain #1/#2 grade deerskin leather. These are whole hides with some holes, blemishes, and scratches on the leather. Most of these imperfections are near the side of the skin. They come in different sizes and shapes. Each piece is different.Deer are not endangered.A USFWS export permit is required for all shipments outside the U.S.

This is topgrain #1/#2 grade deerskin leather. These are whole hides with some holes, blemishes, and scratches on the leather. Most of these imperfections are near the side of the skin. They come in different sizes and shapes. Each piece is different.Deer are not endangered.A USFWS export permit is required for all shipments outside the U.S.

This is TOPGRAIN 3 to 3.5 ounce deerskin leather - often called Buckskin as well. It has a smooth side (skin side) and a rough side (suede side). We sell deerskin leather by the full hide. The full hides vary in size from about 4 square feet to 12 square feet. The average size is 10-12 square feet. Each hide is marked with its size. We can usually select either small, medium, or large hides according to your wishes. Expect to pay between US$50.00 and US$150.00 per hide. We will not, however,...

This is TOPGRAIN 3 to 3.5 ounce deerskin leather - often called Buckskin as well. It has a smooth side (skin side) and a rough side (suede side). We sell deerskin leather by the full hide. The full hides vary in size from about 4 square feet to 12 square feet. The average size is 10-12 square feet. Each hide is marked with its size. We can usually select either small, medium, or large hides according to your wishes. Expect to pay between US$50.00 and US$150.00 per hide. We will not, however,...

This is TOPGRAIN 3 to 3.5 ounce deerskin leather - often called Buckskin as well. It has a smooth side (skin side) and a rough side (suede side). We sell deerskin leather by the full hide. The full hides vary in size from about 4 square feet to 12 square feet. The average size is 10-12 square feet. Each hide is marked with its size. We can usually select either small, medium, or large hides according to your wishes. Expect to pay between US$50.00 and US$150.00 per hide. We will not, however,...

Thought to ward off evil spirits and cleanse a space of negative energy, these fragrant bundles of rosemary can be used for smudging or meditation. They measure about 4" to 5" long, and 1" in diameter. One bundle weigh 23 grams.There are no export controls for this item.

These are scrap leather from deer leather hides tanned using a method that emulates the traditional brain-tanning process. They come in different sizes and shapes. The thickness of the pieces vary but they average around 1 to 1.5 mm thick. These commercial brain-tanned hides have a smoky smell and are supple. Deer are not endangered. A USFWS export permit is required for all shipments outside the U.S.

These Texas western diamondback rattlesnake skins are legally harvested in Texas as part of a program to reduce their numbers in the wild. Our selection includes skins with rattles and without, and they are sold in full skins. They are glycerin-tanned and are suitable for making boots, wallets, guitar slings, and gun slings. Some may or may not have minor imperfections. Before making any items with the skins it is up to the artist or craftsperson to make sure that the materials are suitable...