Made in USA

This imitation sinew is flat and waxed 100% polypropylene with a 70-pound test strength. It is about 1/8" wide and can easily be split like real sinew into four pieces. It is ideal for craft projects such as stitching hides, jewelry, crafts, basket weaving, dream catchers, and more. The rolls weigh approximately 1.3 oz. There are no export controls for this item.

These REAL Bear Claws necklaces hang on a 32" leather strap, with ten of our Real Black Bear Claws. These are mostly made using the rear bear claws.Black bear around the world are considered to be a threatened species. The trade in products from these animals is regulated to ensure that the bears do not face extinction. Black bear are no longer found in some areas, but are quite plentiful in Canada. In fact, according to the Globe & Mail, more than 100,000 black bears are thought to live in...

This 2-ply round twine comes in 2 oz. rolls of 660 feet or 220 yards. This twine is waxed. 100% polyester. It is ideal for craft projects such as stitching hides, jewelry, crafts, basket weaving, dream catchers, and more. There are no export controls for this item.

This is an Amish made rug made in Northern New York by a young mother with a newborn working at home.  This rug was made by Mrs. Miller at her home near Philadelphia, New York.

These reproduction (i.e., not real) hawk feet are some of the best quality on the market today. They are made using plastic resin and are then hand painted. The leg measures 3" to the base of the claw. The width of the middle claw is 5" long. The spread from front claw to back is 2". The spread from the first and third claw is 1.5"

These are EZ peel vinyl bumper stickers. They are all 3.75" by 7.5".

These REAL Bear Claw necklaces hang on a 32" leather strap, with one of our Jumbo Real Black Bear Claws. Subject to availabity as the jumbo claws are harder to get.Our Gxx codes denote individual pieces. If you would like to order a specific necklace, please go to our Gallery to pick the exact one shown.Black bear around the world are considered to be a threatened species. The trade in products from these animals is regulated to ensure that the bears do not face extinction. Black bear are no...

The acrylic leather paint is sold in 2-ounce bottles.These Realeather acrylic paints are an alternative paint product for the leatherwork and crafting industry.Some key product details:No pre-treatment or finish is necessary to obtain a rich, deep color.Ideal for both accent details and full coverage projects.Quick drying and waterproof once fully dry.A wide variety of colors and ability to easily blend allows for easy creation of any hue. ...

These are 4 ounce rolls of fine 3-ply waxed polyester embalmers' twine. There are approximately 233 yards (699 feet) per roll. This embalmers' twine is approximately 1/32" in diameter and is waxed with brown wax. It is 100% polyester with a 40 pound break test strength. Embalmers twine is tightly twisted to facilitate hand sewing fine, straight stitches. Its applications include taxidermy, leather crafting, shoe repair, and, indeed, the preparation of the deceased. It is also ideal for craft...

These are real Texas Western Diamondback Rattlesnakes that have been made into keychains. This keychain is made up of an open-mouthed rattlesnake head that is attached to a snake-style keychain. These measure approximately 2.5" to 4.5" long by 1" to 2" wide, and has a height of 1.25" to 2". Please note that the sizes do vary and may be slightly larger or smaller. The rattlesnake heads are freeze dried. If you live in a humid place, you can spray the head with clear bug spray. Texas Western...

This imitation sinew is flat and waxed 100% polypropylene with a 70-pound test strength. It is about 1/8" wide and can easily be split like real sinew into four pieces. It is ideal for craft projects such as stitching hides, jewelry, crafts, basket weaving, dream catchers, and more. The rolls weigh approximately 1.3 oz. There are no export controls for this item.

These are belt buckles made of genuine rattlesnake heads. The open-mouthed half-head with fang is set against a rattlesnake skin backing with a braided border. As these are natural products, the dimensions of the head will vary. We measured the buckle to be 3.75" long by 2.5" wide. Texas Western diamondback rattlesnakes are not endangered and are not subject to CITES controls. None of our rattlesnake products come from California or Oregon. A U.S. Fish & Wildlife permit is required for...

These quality cow suede laces are ideal for garment trimming, Native crafts, buckskinning, Western wear and jewelry making. They are 1/8" wide and 25 yards long (75 feet) with a 4 to 5 oz. thickness. The lacing on each roll is continuous (i.e., not spliced).Please note that they come from different dye lots so there can be some variation in color.Cows are not an endangered species. These skins are a by-product of the meat industry. The animals were not killed just for their hides. ...

These are high quality nickel-plated moccasin awls. They are sold individually.

These flings are made from nice dyed Tibet lamb skins. Each fling is approximately 47" long, 4" wide not including hair, and 7" to 8" wide including hair.Tibet lamb are not endangered. The skins are a by-product of the food industry and the animals are not killed just for their skins.

These postcards are made from ultra thin veneer in many species of wood. They measure 4 7/8" x 4 3/4". I think they are really neat. They go through the mail without any problem. These are the thinnest wooden cards I have ever seen.These will be discontinued once our stock is sold.

These are genuine leather belts with a real rattlesnake skin outer. They are available in several sizes. The belts measure 1 3/8" wide and 1/8" thick, weighing approximately 220 grams. The belt buckles are attached to the belts with snap fasteners and can be detached.Each belt is unique. You will not get the exact item shown in the photos as these are natural products with minor variations. We will send one similar to the one shown in the photos.When ordering, we recommend getting the size 2"...

This imitation sinew comes in 4 oz. rolls of 400 feet. It is approximately 1/8" wide. This imitation sinew is waxed. 100% polypropylene with a 70 lb. break test strength. It is easy to split. It is ideal for craft projects such as stitching hides, jewelry, crafts, basket weaving, dream catchers, and more. There are no export controls for this item.

This 4-cord polyester waxed thread is extremely strong and is perfect for crafts that require smooth and consistent thread that does not stretch or break. It is ideal for hand-stitching leather as well as for beading jewelry. There are approximately 175 yards on a 4-oz. spool.Metric Conversion:175 yards = 525 feet = 160 meters

These are 3-claw realistic grizzly bear claw necklaces. These realistic claw pendants look so real that they have even fooled conservation officers! The grizzly claws are made from quality plastic resin and are hand-painted in the USA. They come on a 32" deerskin neck strap. The multi-claw necklaces have oxidized (antiqued) brass beads. The claws measure approximately 5" along the outside curve. These necklaces are NOT Native-made. A U.S. Fish & Wildlife export permit is needed for all...

These plastic lion claws were cast from a real lion claw. They are approximately 4" long measured along the outside curve and 2" wide across the top. One claw weighs about 11 grams or 0.4 ounce.

The mule deer 3-antler tip necklaces hangs on a 32" deerkskin strap with brass beads. Lengths of the antler tips are approximately 2.25". All shipments outside of the U.S. require U.S. Fish and Wildlife export clearance. Not for sale in most southeastern states due to state regulations. It was confirmed by USFWS on October 15, 2015 that it is okay to sell white tail deer antler to California because the species is not native to that state. ...

The mystery braid bracelets are 8.5" long and come with pre-attached snaps. They are made using smooth cowhide and come in assorted colors. Each pack has two different color bracelets. Let us know if you have any color preference. Instructions on how to braid are included.

Frank's missing 8-finger necklaces hang on a 32" deerskin strap with brass beads. The reproduction (i.e., not real) plastic fingers, around 3.5" long, were cast from Frank's fingers.