Products 313-336 of 959
Show
Availability: In Stock
Item #: 1231-10-G13268 (Y2I) -
These polished fossilized whale ear bones are from the Pliocene, South Carolina. Fossils are not subject to CITES or USFWS controls.
Availability: In Stock
Item #: 369-LP100 (Y2M) -
We sell assorted premium leather scrap in 1/2 lb. (8 oz.) bags and by the pound. The 8 oz. bags contain lightweight (<4 oz. weight) suede scrap in assorted cow, goat, pig, or deer leathers. The scraps sold by the pound are nice lightweight leather. Colors range from earth tones to brighter colors. This scrap comes in different shapes, sizes, and colors. Unfortunately, we can not sort this product and cannot guarantee similar colors and shapes throughout an order.
Availability: Out of Stock
Item #: 598-SKS-UN -
These Texas western diamondback rattlesnake skins are legally harvested in Texas as part of a program to reduce their numbers in the wild. Our selection includes skins with rattles and without, and they are sold in full skins. They are glycerin-tanned and are suitable for making boots, wallets, guitar slings, and gun slings. These skins are approximately 6.5" to 8" wide at the middle and approximately 1.5" to 2.5" at the narrowest end. Some may or may not have minor imperfections. Before...
Availability: In Stock
Item #: 1080-B1 (Y3D) -
These are slightly chipped quahog shells sold by the pound. There are approximately 5 to 7 shells per pound; however, the number per pound will vary depending on the size of the shells. Each shell is approximately 4" long and 3" to 3.5" wide but sizes will vary.The quahog (or quahaug) is native to the eastern shores of North America. There are specialist names for different sizes of this species of clam. The smallest clams are called countnecks, next size up are littlenecks, then topnecks....
Availability: In Stock
Item #: 158-2M (Y1J) -
These are single antler sides that have been sawn off the skull plate. One 2-point antler measured 7" long by 2" wide and weighed 0.14 pounds. The sizes vary so please let us know if you are looking for a particular size.The mule deer antlers come from Oregon.
Availability: In Stock
Item #: 158-3M (Y1J) -
These are single antler sides that have been sawn off the skull plate. They are approximately 5" to 7" long. One 3-point antler measured 11" long by 4" wide and weighed 0.30 pounds. The sizes vary so please let us know if you are looking for a particular size.The mule deer antlers come from Oregon.
Availability: In Stock
Item #: 158-4M (Y1J) -
These are single antler sides that have been sawn off the skull plate. One 4-point antler measured 9" long by 9" wide and weighed 0.52 pounds. The sizes vary so please let us know if you are looking for a particular size.The mule deer antlers come from Oregon.
Availability: In Stock
Item #: 158-P (Y3K) -
These antler pieces were specially selected for making pens. They are not wider than 5/8". These are an assortment of white tail deer, mule deer, and elk. There are approximately 8 pieces more or less per pound, depending on the size of the pieces chosen.All shipments outside of the U.S. require U.S. Fish and Wildlife export clearance. Not for sale in most southeastern states due to state regulations. It was confirmed by USFWS on October 15, 2015 that it is okay to sell white tail deer antler...
Availability: In Stock
Item #: 39-02-AS (Y2N) -
These are tanned white-tailed, or whitetail, deer skins. They have a reddish-brown coat in the spring and summer that turns to gray-brown in the fall and winter. This deer has a distinctive white underside to its tail. Please note that deer have a hollow hair and are not ideal for rugs. If you walk on them or let a large dog sit on them, the hair will break and shed over time. They are ideal for wall mountings, floor displays that are not walked on, etc. The hair length is approximately 1.5"...
Availability: In Stock
Item #: 40-GAR-G01 (Y1L) -
This hide did not fit into our stock colors so we are selling it by the hide as a gallery item. It is a good quality hide. This is TOPGRAIN deerskin leather--often called Buckskin as well. It has a smooth side (skin side) and a rough side (suede side). We sell deerskin leather by the full hide. The White Tail Deer hides vary in size from about 8 square feet to 13 square feet. Each hide is marked with its size.
Availability: In Stock
Item #: 1172-20 (Y2O) -
These are cleaned assorted real cow bones.
Availability: Out of Stock
Item #: 1172-41 -
These are cleaned assorted real cow bones.
Availability: In Stock
Item #: 1172-LB (Y2P) -
These are cleaned assorted real cow bones.
Availability: In Stock - Please call/email us to order
Item #: 40-01-MB (Y1E) -
This is topgrain #1/#2 grade deerskin leather. These are whole hides with some holes, blemishes, and scratches on the leather. Most of these imperfections are near the side of the skin. They come in different sizes and shapes. Each piece is different.Deer are not endangered.A USFWS export permit is required for all shipments outside the U.S.
Availability: Out of Stock
Item #: 421-1-TB -
Heavy and durable are the two words that best describe our topgrain elk leather. This leather is similar to moose leather - but at just a fraction of its price ;-). Similarly, they are grainy and suitable for making moccasins or gloves. It can be used for projects needing big continuous piece of leather that is sturdy, soft and pliable.These are near perfect hides, allows for 1-2 small defects in the prime cutting areas and 3-4 defects across the rest of the hide.
Availability: In Stock
Item #: 55-51MB (Y2J) -
The goat rawhide is thin and therefore ideal for making smaller hand drums, lamp shades, and craft projects. The pieces are very clean and are not full of holes. The weight varies somewhat from skin to skin. If you need a very thin piece or a heavier piece, let us know. Also, there is variation in the hides from light to dark, so that some of the natural hides may look bleached. We will do our best to accommodate small quantities. For orders of six or more skins, the rawhide will be shipped as...
Availability: Out of Stock
Item #: 52-CR-A-AS -
We offer a variety of badger skins. Our North American craft-grade badger skins are uncased (i.e., open, not closed like a sausage). We measured one craft badger skin as 23.50" long, 14" wide across the top, 15.50" across the middle and 9" across the bottom. It weighed 0.62 lbs.Badger are not an endangered species.Not for sale in the following states: Indiana.A U.S. Fish & Wildlife export permit is needed for all shipments outside the United States. ...
Availability: Out of Stock
Item #: 1257-TP -
The white-nosed coati, also known as coatimundi, is a species of coati and is a member of the raccoon family. One Trading Post coatimundi skin measured was 23" long, 6" wide and weighed 0.48 lbs.
Availability: In Stock
Item #: 15-217-G04 (Y1K) -
Castrated male cattle are called steers. Sometimes they are called bullocks. The steer skulls with horns do not have lower jaws. They have been cleaned.The steer skulls are a by-product of the food industry and were not just killed for their skulls.We cannot ship steer skulls to Canada because of concerns over BSE (Bovine Spongiform Encephalopathy).
Availability: In Stock
Item #: 15-217-W-G13 (Y1J) -
Castrated male cattle are called steers. Sometimes they are called bullocks. The weathered steer skulls with horns do not have lower jaws. They have been cleaned.The steer skulls are a by-product of the food industry and were not just killed for their skulls.We cannot ship steer skulls to Canada because of concerns over BSE (Bovine Spongiform Encephalopathy).
Availability: In Stock
Item #: 15-261 (Y1M) -
These are real red ear turtle skulls. One skull measured 1.5" long, 1" wide, and weighed 0.2 oz (6 grams). The upper and lower jaws may be separate or glued together. Red ear turtles are not subject to CITES controls. Not for sale in Indiana. Not for export to the European Union due to local import restrictions. A USFWS export permit is required for all exports outside of the U.S. ...
Availability: In Stock
Item #: 175-30-G84 (Y2O) -
If you are looking for a nice, tanned black bear skin to put by the fireplace or hang on the wall of your cabin or lodge, we have a selection of heavily furred, U.S. and Canadian black bear skins that have been commercially tanned. They are all winter hides because they are not allowed to be hunted in the summer. These black bear skins have heads and claws. The hair is 3" to 4" long. The skin does not include the skull and is not mounted (with eyes and teeth, etc.). The skins average about 4.5...
Availability: Out of Stock
Item #: 50-55-AS -
If you are looking for a wonderfully comfortable rug to put your feet on while working at your desk, try a sheared beaver skin. Sheared beaver has a truly decadent feel to it. All of the long guard hairs have been removed and only the dense underfur remains.The fashion-quality R-50-50-AS sheared beaver rugs are extra large beaver skins, also called "blanket" beaver because of their size. Each skin is slightly different in shape and dimensions. Some are more oval while others are rounder. They...
Availability: In Stock
Item #: 15-4A14-G14 (Y2P) -
These are professionally cleaned alligator skulls from a variety of sources in Louisiana and Florida. The alligator skulls from larger alligators are typically hunted during statewide hunts.Alligators, crocodiles, and caiman are endangered in most areas in the wild. In the US, alligators in the wild are protected under the U.S. Endangered Species Act. The State of Louisiana has occasional licensed hunts in the wild to reduce the number of alligators. Chichester is licensed by the New York...