Animal Teeth & Tusks

The teeth have been boiled to detach them from the skull and soaked in mineral oil to help prevent cracks. The coyote canines are approximately 1.5" to 2" long from tip to tip along the outside curve. The cracked teeth may or may not be drilled with a hole in the side. The cracks can be filled in with glue. A USFWS export permit is required for all shipments outside the USA.

These are #1 premium boar tusks from The Philippines. These tusks have been cleaned and are ready to use for making jewelry or displaying.The double boar tusks are made from two boar tusks that are glued together and tied with twine. The tusks are hollow at the base so they are glued together with a small piece of wood inserted inside them. They are perfect for use as pendants.They are measured from tip to tip along the outside curve of the tusks.The genus and species for wild boar and...

The teeth have been boiled to detach them from the skull and soaked in mineral oil to help prevent cracks. The coyote canines are approximately 1.5" to 2" long from tip to tip along the outside curve. The #1 teeth are good quality that are not cracked. The drilled teeth were drilled through the side for use in a necklace. A USFWS export permit is required for all shipments outside the USA.

These water buffalo teeth were taken from domesticated water buffalo. They have been cleaned and come drilled. They are ideal for craft projects or for making pendants. They can be stained in tea to make them look old fashioned. The teeth are approximately 1.5 - 1.75" (3.75 - 4.4 cm) long and 1/2" to 5/8" (1.25 - 1.5 cm) wide.Domesticated water buffalo are not endangered. The teeth were by-products of the food industry.

We have a limited number of real elk ivories for sale at any given time. They are about 0.75" to 1" long.Elk are not an endangered species.

We have a limited number of real elk ivories for sale at any given time. They are about 0.75" to 1" long.Elk are not an endangered species.

We have a limited number of real elk ivories for sale at any given time. They are about 0.75" to 1" long.Elk are not an endangered species.

These REAL Seal Tooth Canine Necklaces are made using fossilized teeth and are strung on a 1 mm black waxed cotton cord. They come with a descriptive card. Strap Length: adjustable from 21" to 29" Tooth Length: 1" to 1.25"

These real sled dog or wolf fossil teeth come packaged with a descriptive card There are no export controls on fossilized sled dog/wolf canines.

These fossilized walrus teeth are priced by the pound. You are not required to buy a whole pound. While the counts can vary considerably from lot to lot, there are approximately 50 to 100 small teeth per pound, 30 to 55 large teeth per pound, and 15 to 30 jumbo teeth per pound. If you wish, we can send a picture of the assortment we select for your approval prior to shipping. The teeth come assorted and we do not high grade just the biggest and best. Size Length Weight Small 1" to 1.5" (2.5 to...

The fox canines (incisors) are smaller than the coyote canines. They measure 1.25" (3 cm) on average and are ideal for craft projects. We have about 400 on hand at the moment.These are teeth from red fox in Quebec.

The fox canines (incisors) are smaller than the coyote canines. They measure 1.25" (3 cm) on average and are ideal for craft projects. The #2 grade is characterized by hairline cracks, splitting and breaks on the teeth.These are teeth from red fox in Quebec.

These are real great white shark teeth. This shark is also known by the following names: great white, white pointer, white shark, or white death. Subject to CITES. No exports from the United States due to paperwork requirements. Imported from Taiwan.

These mako shark teeth have been cleaned, sanded, and bleached and are ready for wiring or drilling for making shark jewelry. These teeth are NOT fossilized and are a bright white in color. The length of the teeth are approximate and is the maximum length from base to tip. Mako sharks are subject to CITES II and are not for export out of the United States.

These mako shark teeth have been cleaned, sanded, and bleached and are ready for wiring or drilling for making shark jewelry. These teeth are NOT fossilized and are a bright white in color. The length of the teeth are approximate and is the maximum length from base to tip. Mako sharks are subject to CITES II and are not for export out of the United States.

These moose teeth come from wild moose in Quebec, Canada. They have been cleaned, but not drilled. They are ideal for making pendants. They can be stained in tea to make them look old- fashioned. They average 1.75 - 2" (4.4cm - 5cm) in length and 1/4" (0.6 cm) in width.Moose are not an endangered animal. These teeth come from moose that have been hunted in Canada. The meat from the animals is generally saved. The animals were not killed just for their teeth.